What Does the “UE” Error Code Mean on Your Washing Machine?

Seeing a ‘UE’ error code flash up on the display panel of your washing machine can be confusing and concerning. But not to worry – this code is generally harmless and easy to address.

‘UE’ error code means an ‘Unbalanced Load’ is detected during the spin cycle

In most washing machine models, ‘UE’ represents an ‘Unbalanced Load’. The load inside the machine drum may be heavier on one side. So when it tries to spin at high speed, this causes the entire unit to tremble and shake.

To prevent damage to itself, the machine will stop the spin cycle and display the ‘UE’ warning. While ‘UE’ does not signify a critical fault, it’s worth investigating so your laundry gets clean.

Simple Ways to Fix an ‘Unbalanced Load’ Error in Washing Machine

There are 3 straightforward methods to resolve an ‘UE’ unbalanced load error:

1. Redistribute the clothes even in the drum:

Open the washer door and separate, rearrange or remove some of the heavier wet items like blankets or towels. Place them evenly around the machine tub. Remove any particularly bulky or large pieces of clothing, run them separately. Then restart the cycle.

2. Only wash small or similarly-sized items together:

UE errors are more likely to occur when washing a mixed load of sheets, towels and lightweight garments. Make sure the drum isn’t overly full. Wash oversized/heavy/bulky items separately from smaller pieces. Load symmetry is key.

3. Check machine leveling and ensure stabilisers are unbroken:

UE issues could be caused by an off-balanced washer. Check all 4 stabilising feet under your machine are intact and screwed firmly against the floor. Adjust as needed to level the unit. Use a spirit level on top to verify it is perfectly even.

With a few simple appraisals and easy adjustments, that UE error code should disappear once and for all. And you’ll be free to resume laundry as usual without any more unbalanced load problems!

Common Questions Around the UE Error Code in Washing Machines

Still have some unanswered questions about ‘UE’ error codes? Here are helpful replies to some frequently asked questions:

Why does my washing machine keep showing UE even with a small load?

If you keep seeing UE with lighter loads, the drum bearings could be worn, or the shock absorbers may need replacing. This allows more vibration. A repair technician can inspect and replace these parts.

The UE error won’t go away after rearranging clothes. What now?

If redistributing the load doesn’t resolve the issue, there may be an underlying fault. Control boards, sensors or motor problems could incorrectly cause a UE code. Schedule a repair person to troubleshoot and diagnose the washer.

Can I disable or override the UE error code?

UE errors exist to protect the machine, so cannot be permanently disabled. But some washers let you press start after a UE to resume the cycle. The error may persist however. Resolving the root cause is best long-term.

I hope this detailed guide has demystified the meaning behind ‘UE’ on your washer display! With some basic troubleshooting, balanced loads and occasionally seeking technical repairs, the UE code should stop interrupting your laundry.

Thanks for reading! Drop any comments or questions below.

Suggested Repair Services for UE Error Issues

  • WASHER DOCTOR Top Loading Washing Machine Repairs – 0423 371 383
  • Washing Machine Gurus – 1300 MACHINE
  • Spin Pro Laundry Equipment Repairs – 0432 067887

Leave a Comment